Descrição
IMPORTANT: Support has moved to the ZATZLabs site and is no longer provided on the WordPress.org forums. If you need a timely reply from the developer, please open a ticket.
Beyond what the name implies, the Reveal Network Activated Plugins plugin can display all Plugins that WordPress would normally hide: WordPress only displays Network Activated and Must-Use plugins, as well as Drop-ins, on the Installed Plugins Network Admin panel; even there, they can be easily missed. Under the control of any Super Administrator, Reveal Network Activated Plugins allows Network Activated and Must-Use plugins, and Drop-ins, to be displayed on each site’s Installed Plugins Admin panel, with “Network Activated”, “Must-Use Plugin” or “Drop-in” displayed below the plugin name where “Activate” or “Deactivate” is displayed for other plugins. In addition, the plugin’s Network Admin panel, available only to Super Administrators, and the Delete Plugins panel, show which Plugins are activated on which Sites within the WordPress Network.
In a WordPress Network, i.e. – a single WordPress installation that provides multiple sites (“Multi-site”), Plugins can be activated on one or more individual sites or they can be Network Activated, which means they are activated on all sites. In addition, Must-Use plugins are automatially activated if present and Drop-ins are activated Network-wide by a Constant set in wp-config.php. Confusion can result because WordPress does not display any of these plugins on each site’s Installed Plugins Admin panel, a confusion that this plugin hopes to eliminate.
A warning Notice is displayed if this plugin is activated on a WordPress installation that is not (yet) a WordPress Network.
Every effort has been made to not interfere with plugins that create or modify their own entry on the Installed Plugins Admin panel.
Settings
A Settings page for this plugin is available to Super Administrators on both the Plugins and Settings submenus within the Network Administration panels. It determines which plugins are visible on the Plugins Admin panel of each site within the Network.
A “Who Sees Them?” table of choices can be used to set who sees Network-Activated and Must-Use plugins, and Drop-ins. It can even be used to hide any or all of them from everyone.
The Plugins row of the table actually controls the same Setting as the “Enable administration menus – Plugins” checkbox at the bottom of the Network Settings Admin panel. It is provided here to avoid the confusion that otherwise exists when Super Administrators cannot figure out why their Site Administrators do not even have a Plugin menu on their Site Admin panels.
Within the “Who Sees Them?” table, the column entitled “Site Administrators” also refers to anyone else with the “activate_plugins” Capability for the Site.
A “Show/Hide Plugins” table of choices can be used to always Display or Hide specific plugins for Site Administrators. This is especially useful for Super Administrators developing or testing new plugins that are not yet ready for use by Site Administrators. It can be also used when only a few of the many plugins installed are to be made available to Site Administrators.
Definitions
Super Administrator – controls the Network (multi-site) settings and setup, as well as settings and setup for all individual Sites within the Network, through access to all Admin panels for the Network and all Sites.
Site Administrator – has no access to Network settings and setup, but does have access to Admin panels for any Site for which he has the Role of Administrator.
“activate_plugins” Capability – one of many settings for a User for a specific Site, i.e. – each User either has or does not have the “activate_plugins” Capability for a given Site. Anyone with the Role of Administrator for a Site automatically has the “activate_plugins” Capability and it cannot be removed. However, it can be disabled through the “Enable administration menus – Plugins” Network setting described above.
Adoption Notice
This plugin was recently adopted by David Gewirtz and ongoing support and updates will continue. Feel free to visit David’s Lab Notes for additional details and to sign up for emailed news updates.
Special thanks to Jon ‘jonradio’ Pearkins for creating the plugin and making adoption possible.
Instalação
IMPORTANT: Support has moved to the ZATZLabs site and is no longer provided on the WordPress.org forums. If you need a timely reply from the developer, please open a ticket.
This section describes how to install the jonradio Reveal Network Activated Plugins plugin and get it working. Although not described below, it can be installed on a non-Multisite, i.e. – not a WordPress Network, but the plugin provides no value except to WordPress Networks.
- Use the Add New Plugins submenu selection within the WordPress Network Admin panels to download and install this jonradio Reveal Network Activated Plugins plugin from the WordPress.org plugin repository (preferred method). Or download and unzip this plugin, then upload the
/jonradio-reveal-network-activated-plugins/directory to your WordPress web site’s/wp-content/plugins/directory. - Network Activate this plugin through the Installed Plugins Network Admin panel (preferred method). Alternatively, you can Activate it individually on the sites where you wish to use it, but you will not have access to the plugin’s Setting page which is located in the Network Admin panels. Because these Settings almost certainly will require your review, the only practical alternative is to Network Activate the plugin, adjust its Settings, Network Deactivate the plugin, and Activate it individually on the sites where you wish to use it.
Perguntas frequentes
IMPORTANT: Support has moved to the ZATZLabs site and is no longer provided on the WordPress.org forums. Please visit the new ZATZLabs Forums. If you need a timely reply from the developer, please open a ticket.
-
Where is the Settings page for jonradio Reveal Network Activated Plugins?
-
It can be found in both the Settings and Plugins submenus (left sidebar) in the Network Admin panels. The jonradio Reveal Network Activated Plugins plugin must be Network Activated before these pages will appear in the submenus.
Even if you don’t want the plugin Network Activated, you can do so temporarily, until you have the Settings set the way you want them. The plugin stores the settings until you Uninstall the plugin, which means they will still be available after you Network Deactivate the plugin and later Activate it on one or more individual Sites in a WordPress Network.
-
By default, WordPress only displays a Plugins menu item to Super Administrators.
To change this behaviour, select the “Enable administration menus – Plugins” checkbox at the bottom of the Network Settings Admin panel. For your convenience, this same WordPress setting can be controlled from the plugin’s Network Settings page, through the Plugins row of the “Who Sees Them?” permissions table.
Avaliações
Contribuidores e programadores
“Reveal Network Activated Plugins” é software de código aberto. As seguintes pessoas contribuíram para este plugin:
Contribuidores
Traduza o “Reveal Network Activated Plugins” para o seu idioma.
Interessado no desenvolvimento?
Browse the code, check out the SVN repository, or subscribe to the development log by RSS.
Registo de alterações
3.1.2
- Correct Save Settings that lost value of Show setting
3.1.1
- Enabled Search functionality on individual Sites’ Installed Plugins Admin panel
3.1
- Rewrote “What is Activated Where?” to correct for new Caching of Plugin data in WordPress Version 3.9
- Fixed “Important Notice” link in non-Network WordPress installs
3.0
- Add “Show/Hide Plugins” section to Network Settings page for plugin, to allow specific plugins to be always hidden or always shown to non-Super Admin Site Administrators
2.1
- Expand Delete Plugins confirmation panel to show where (which sites) each plugin is Activated
2.0.1
- Refresh old (Version 1.2) Settings with New (Version 2.0)
2.0
- Add Must-Use plugins and Drop-ins to the Installed Plugins Admin panel for individual sites of a WordPress Network.
- Add Settings to control the display of different types of plugins on the Installed Plugins Admin panel for individual sites of a WordPress Network.
1.2
- Expand plugin’s Network Admin panel to show where (which sites) each plugin is Activated.
1.1
- Add Network Admin panel with network-wide option to only allow Super Admins to view Network-Activated Plugins, or not.
1.0
- Make plugin conform to WordPress plugin repository standards.
- Fix “You do not have sufficient permissions to manage plugins for this site.” when trying to login